Introduction
A TI-99/4A cartridge (a module) can hold two kinds of memory: ROM that the TMS9900 processor reads directly in the 8 KB window >6000->7FFF, and GROMs, serial-access chips holding code in the console’s own byte code, GPL,
reached through the ports at >9800. A dump of a cartridge has no container and no header of its own: it is plain bytes, one file for each kind. The convention that MAME, FinalGROM 99 and the community use names the files by the last letter before .bin
(ninerpedia Formats and the FinalGROM 99 page, read 2026-11-18 as summaries: “our words”):
| Name ends in | Content |
|---|---|
C (namec.bin) | The ROM at >6000->7FFF, bank 0: up to 8 KB |
D | An optional second ROM bank (bank 1): exactly 8 KB; Extended BASIC and some AtariSoft games use it |
G | The GROMs, from GROM address >6000 (a cartridge’s first GROM): up to 40 KB for FinalGROM 99 |
8, 9 (Classic99, FinalGROM) | ROM files in the non-inverted and the inverted form; this page set does not model them: an image is shown as it is |
The viewer opens such a file in two ways. A file that starts with the standard header byte >AA and has a well-formed program list is recognised: by its bytes, whatever its extension, and in particular when it is a .bin.
It opens as TI-99/4A cartridge image (see the header page for the test). The bytes of a ROM and a GROM look alike (the same header), so a choice, Read the file as, decides, with a default from the name’s last letter:
G is a GROM, anything else a ROM. A ROM is disassembled as TMS9900 code at >6000 (each 8 KB of a larger file as another bank at >6000), starting at the first program of the menu list; a GROM shows its header and
menu entries, and the GPL code is not disassembled: no GPL decoder exists on this site.
A ROM file with no header (it has none if it only holds code that something else starts) cannot be recognised. It is offered in Read as under Raw / headerless as TI-99/4A cartridge ROM (headerless), with the same CPU, the same memory map and the same bank placing.
Software
- Classic99 – TI-99/4A emulator for Windows
- MAME – emulator with TI-99 drivers; loads RPK packages and the dump files (Windows, macOS, Linux)
- JS99’er – TI-99/4A emulator in the browser
- FinalGROM 99 – a flash cartridge that loads the C, D and G files
- xdt99 – cross-development tools: assembler xas99, disassembler xda99 and the GPL tools (used to build the test cartridge)
Structure
0x0000Standard header:>AA, version, number of programs, and four list pointers; the header page12 bytes- Lists: the program list (the console’s menu entries: a link, a start address, a name), and the power-up, DSR and subprogram listsanywhere in the first 8 KB
- Code and data: TMS9900 code in a ROM, GPL code and tables in a GROMup to 8 KB per bank
What the viewer shows
- Structure tab: the ROM block (or each bank) with the header and each list item inside it; for a GROM the header, the items and the rest.
- Raw code tab (ROM): the table of the raw viewer (the CPU is fixed by the platform), the header (
>AA, version, programs declared), every list with its items (name and start address), the number of banks. The entry offset starts at the first program’s start address. - The disassembly: every byte decoded in columns with the TMS9900 decoder. The VDP, GROM, speech and sound ports of the memory map are named (
VDPWA,GRMRD,SOUNDand so on). - The test cartridge (built with xas99 from a source written for this work: header at
>6000, one programSAMPLE) opens with its program list read, the entry at the address the assembler’s listing gives, andVDPWAnamed in the code.
Not described
Known, not yet covered
- Viewer: GPL: a GROM’s code is shown as bytes. A GPL decoder is the missing piece (the opcodes are documented in the TI-99 community’s GPL references and in xdt99’s GPL tools).
- Viewer: bank switching: banks are shown one after the other, each at
>6000; the write addresses that switch them (>6000,>6002, …) are listed on the RPK page per board type, but a program’s writes are not followed. The 12 KB (4K + two 4K banks at>7000), MBX, MiniMemory, Super Space, the 379/378/377 latch boards and the GROM-emulating boards are not placed specially. - Viewer: the inverted images (suffixes 8 and 9) and the GRAM Kracker and other headered formats (ninerpedia names the GRAM Kracker format as the most used); FinalGROM 99 files over 8 KB with the G part beyond the first GROMs; a file whose header is in a GROM other than the first.
- Viewer: the interrupt link list of the header, whose place in it could not be confirmed (see the header page), and the console ROM’s entry points (KSCAN and the utilities): no readable source gave their addresses.
- Reference: the TMS9900’s own pages carry their lists; the TI-990 and TMS9995 extras are described there.
Unknown
- Reference and viewer: Thierry Nouspikel’s Standard headers page, the best reference for the header, could not be read directly (the server answered 403 or asked for a human check, which was not worked around); the header page rests on summaries of it, of ninerpedia and of forum threads, and says where.
Also used for
- TI-99/4A RPK cartridge – TI-99/4A rompack: a ZIP of cartridge dumps and a layout.xml naming the board.
Links
Software
Reference
- Ninerpedia: formats – the C, D and G naming and the headered dump formats
- FinalGROM 99 – naming rules, sizes and the inverted images
- Thierry Nouspikel: Standard headers – the header (not read directly; see above)
- Standard header and GROM files, Memory map and ports, RPK cartridge packages
- TMS9900 instruction set – the decoder
- Raw machine code – the viewer the headerless form is built on, and how to reach it