Where this comes from, and how sure it is
Thierry Nouspikel’s architecture page, the usual reference, could not be read directly (403 and a human-verification page; not worked around). The map below is built from MAME’s gromport.cpp (the cartridge connector: /ROMG for >6000->7FFF,
/GS for >9800->9BFF, an 8 KB window), from MAME’s ti99_4x.cpp (only the CRU details) and from web-search summaries of ninerpedia, AtariAge and Wikipedia (read 2026-11-18; “our words”), which agree on the port addresses. The port names are the usual assembly equates
of the TI world, used as labels; the GROM write-address port >9C02 is confirmed only by the pattern of the other ports, not by a summary that names it.
The memory map
| Address | What |
|---|---|
>0000->1FFF | Console ROM: 8 KB, the monitor and the GPL interpreter (two 4 KB ROMs); >0000 holds the reset vector |
>2000->3FFF | Low memory expansion: 8 KB of RAM with the 32K expansion |
>4000->5FFF | Device service routine space: 8 KB shared by the peripheral cards, one switched in at a time through the CRU |
>6000->7FFF | Cartridge ROM: an 8 KB window. A ROM of more than 8 KB is switched through it by writes to the ROM addresses (>6000, >6002, …), as Extended BASIC does (MAME) |
>8000->83FF | Scratchpad: 256 bytes of fast 16-bit RAM at >8000->80FF, repeated at >8100, >8200 and >8300 (the address is not fully decoded) |
>8400->87FF | Sound chip |
>8800->8BFF | VDP read ports: >8800 read data, >8802 read status |
>8C00->8FFF | VDP write ports: >8C00 write data, >8C02 write address and register |
>9000->93FF | Speech synthesizer read |
>9400->97FF | Speech synthesizer write |
>9800->9BFF | GROM read ports: >9800 read data, >9802 read address (the address counter can be read back, unlike the VDP’s) |
>9C00->9FFF | GROM write ports: >9C00 write data (GRAM), >9C02 write address |
>A000->FFFF | High memory expansion: 24 KB of RAM with the 32K expansion |
Not in the CPU map: 16 KB of VDP RAM, which only the VDP reaches (the CPU asks it through the ports above), and the GROM space of 64 KB, reached through the GROM ports with an address that counts up after every access. The console holds three GROMs of 6 KB
(GROMs 0 to 2, 18 KB in all: the operating system and TI BASIC, per Wikipedia); a cartridge’s start at GROM address >6000. The CRU is a separate 12-bit address space (MAME: A3-A14, the internal TMS9901 incompletely decoded at >0000->03FF).
The names the explorer uses
| Address | Name | What |
|---|---|---|
>8300 | PAD | The scratchpad (the last repeat, where most programs keep their workspace) |
>8400 | SOUND | Sound chip |
>8800 | VDPRD | VDP read data |
>8802 | VDPSTA | VDP status |
>8C00 | VDPWD | VDP write data |
>8C02 | VDPWA | VDP write address and registers |
>9000 | SPCHRD | Speech read |
>9400 | SPCHWT | Speech write |
>9800 | GRMRD | GROM read data |
>9802 | GRMRA | GROM read address |
>9C00 | GRMWD | GROM write data |
>9C02 | GRMWA | GROM write address |
A name is shown where an operand is exactly that address; a mirror (the scratchpad repeats, the ports have unused address lines) shows as a number.
Not described
Known, not yet covered
- Reference: the console ROM’s entry points (KSCAN, the utility routines, the interrupt vectors and the console workspace usage) and the GPL interpreter’s scratchpad variables: they are documented in the TI-99 community’s references, but no readable source for the addresses was reached, so none is listed or named.
- Reference: the CRU map (the TMS9901 bits, the peripheral card base addresses at
>1000and up), the VDP registers and the sound and speech commands.
Unknown
- Reference: the numbers on this page that no readable primary source was reached for: see the first section.
Links
Reference
- Thierry Nouspikel: The TI-99/4A internal architecture – the primary page (not read directly)
- MAME gromport.cpp – the cartridge connector
- Wikipedia: TI-99/4A – the memory layout in outline
- TI-99/4A cartridge image – the overview