Introduction
The Emerson Arcadia 2001 is a game console built round a Signetics 2650 processor and a Signetics 2637 video chip (the UVI). A cartridge is a
ROM chip and nothing else, and its file is the contents of that chip: no header, no signature, no checksum. Cartridges are usually 2, 4, 6 or
8 KB (our words: the MAME driver describes 4 KB blocks, the first at $0000 and a second one at $2000 for an 8 KB cartridge such as Jungler; the other sizes are
not sourced).
No extension belongs to the format. MAME’s software list and Batocera use .bin, which means hundreds of other things on this site, and .arc, which
has also been suggested, is the extension of the ARC archive; so the explorer claims neither. It does not look at the bytes either, because there is nothing in them to
recognise. The viewer appears only in the Read as list, under Raw / headerless, as Emerson Arcadia 2001 ROM (headerless).
Choosing it fixes the processor (a 2650, with its own instruction set pages), places the file in the console’s memory and gives the hardware registers their names. Everything else is the raw machine code viewer: the options bar still has the 2650’s variant and display options, the base address, the entry offset, the region start and length, and the labels.
Software
- MAME – emulator with an Arcadia driver (Windows, macOS, Linux)
- WinArcadia – Arcadia, Interton and Elektor emulator (Windows, Amiga and others)
Structure
0x0000ROM block 1: the first 4 KB, seen by the 2650 at$0000-$0FFF; the processor starts here after a resetup to 4 KB0x1000ROM block 2: the second 4 KB of an 8 KB cartridge, seen at$2000-$2FFFup to 4 KB
The file is one run of bytes; the second block is only a different place in the console’s memory, which is why the viewer shows an 8 KB file as two code regions. The memory map lists what the rest of the address space holds.
What the viewer shows
- Raw code tab: the table of the raw viewer (the CPU is fixed by the platform), the regions, the entry, and three facts the bytes give: the platform, the size class and the reset address. They are facts about the file, never a claim that it is an Arcadia ROM: nothing can say that.
- One region for a file up to 4 KB; two (ROM block 1 at
$0000, ROM block 2 at$2000) for a larger one. Bytes beyond 8 KB have no address in the MAME map and appear only in the Structure tab. Changing the base address, region start or region length gives one plain region again. - Names for operand addresses: the 30 UVI registers and inputs and the starts of the screen and user RAM areas (the list). The 2650’s absolute addresses are 13 bits within an 8 KB page, so a name shows only where the operand is that address.
- The disassembly: every byte decoded, in columns, with the 2650’s statuses (the ten undefined opcodes are marked illegal).
The one real 2650 program on the machine where this was written is a 312-byte demo built for the emulators.org Arcadia emulator; it opens as one region, 124 instructions
end exactly at its last byte, and it writes to UVI_COLOURS ($19F9) as expected. No commercial cartridge dump was used.
Not described
Known, not yet covered
- Viewer: the Palladium VCG clone’s extra ROM blocks at
$4000-$7FFFand the Golf cartridge (2 KB at$4000): MAME describes them; the viewer places a file only at$0000and$2000. - Viewer: the mirrors. The memory map lists them; the names are applied only to the first copy of the UVI area (
$1800-$19FF), not to$1B00,$1C00or the others. - Reference: the Signetics 2637 data sheet and the Arcadia programming manuals were not read (PDFs); register names are the viewer’s, built from MAME’s comments.
- Viewer: Interton VC 4000 and Elektor TV Games Computer cartridges, which use the same processor and video chip family.
Unknown
- Reference and viewer: the sizes of cartridges in the wild beyond what MAME’s two block sizes say, and a standard extension for the files.
- Viewer: the registers at
$19FA-$19FDare inferred from comments in MAME and the fields its video code uses, not from an explicit table; the sound and scroll bits are described only as far as MAME’s comments go.
Links
Software
- MAME – emulator with an Arcadia driver (Windows, macOS, Linux)
- WinArcadia – Arcadia, Interton and Elektor emulator
Reference
- MAME arcadia.cpp – the memory map, ROM blocks and keypad ports this page follows (read 2026-11-18)
- Signetics 2650 instruction set – the decoder the viewer uses
- Raw machine code – the viewer this is built on, and how to reach it