Where this comes from
Everything on this page is read from the header comment and the code of MAME’s Arcadia driver, src/mame/arcadia/arcadia.cpp (fetched 2026-11-18; the fetch tool returns summaries, so
where a rule rests on one it is “our words”). That source describes addresses and meanings but gives no register names: the names in the tables are the explorer’s own labels,
chosen from MAME’s descriptions. The Signetics 2637 data sheet was not read.
The 2650’s address space
The 2650 has 15 address bits (32 KB). The cartridge ROM is wired into the first 4 KB and, for an 8 KB cartridge, a second 4 KB at $2000.
| Address | What | Notes |
|---|---|---|
$0000-$0FFF | ROM block 1 | The first 4 KB of a cartridge. The processor starts here after a reset. |
$1000-$17FF | Mirror of $1800-$1BFF | Mirror (MAME). |
$1800-$1BFF | The 2637 UVI area | Screen, sprites, registers, keypads: see below. |
$1C00-$1FFF | Mirror of $1800-$1BFF | Mirror (MAME). |
$2000-$2FFF | ROM block 2 | The second 4 KB of an 8 KB cartridge (Jungler, MAME). |
$3000-$7FFF | Mirrors | $3000, $5000, $7000 mirror $1000-$1FFF; $4000, $6000 mirror $0000-$0FFF (MAME). |
The Palladium VCG, a clone, differs: $4000-$7FFF are four separate 4 KB ROM blocks (the first 2 KB of $4000 used by the Golf cartridge), and $1000-$17FF, $1C00-$1FFF
and $3000-$3FFF could be ROM or RAM but no cartridge uses them (MAME). The explorer places a file only at $0000 and $2000.
The 2650 has no I/O port that is connected: MAME says its read/write port commands “do not appear to be connected to anything in hardware” and no cartridge uses them. The sense input carries the vertical sync, and MAME also runs a periodic interrupt each line although its header says interrupts are not supported (the source contradicts itself there).
The UVI area $1800-$1BFF
| Address | What |
|---|---|
$1800-$18CF | Screen, upper 13 lines: characters and the high bits of the palette |
$18D0-$18EF | Free for user programs |
$18F0-$18F7 | Sprite coordinates: y0 x0 y1 x1 y2 x2 y3 x3 |
$18F8-$1908 | UVI registers (the table below) |
$1909-$197F | Unmapped |
$1980-$19BF | User-defined characters: eight characters of eight bytes |
$19C0-$19F7 | Unmapped |
$19F8-$19FF | UVI registers (the table below) |
$1A00-$1ACF | Screen, lower 13 lines |
$1AD0-$1AFF | User memory |
$1B00-$1BFF | Mirror of $1900-$19FF |
Registers, inputs and the names the explorer uses
Access is what MAME’s video code does with the address; the meanings are its comments. Rows marked inferred are inferred by MAME’s source from header comments and the fields its code uses, not from an explicit table.
| Address | Name | Access | What |
|---|---|---|---|
$18F0, $18F2, $18F4, $18F6 | UVI_OBJ0_Y to UVI_OBJ3_Y | write | Vertical offset of object 0 to 3 |
$18F1, $18F3, $18F5, $18F7 | UVI_OBJ0_X to UVI_OBJ3_X | write | Horizontal offset of object 0 to 3 |
$18FC | UVI_ROWCOUNT | write | Complement of the row count from the trailing edge of the vertical reset: sets the top of the display |
$18FD | UVI_PITCH_MODE | write | Sound frequency (bits 0-6) and the colour mode (bit 7) |
$18FE | UVI_VOLUME_SCROLL | write | Loudness, sound and noise enable, row delay; bits 5-7 the horizontal scroll |
$18FF | UVI_LINE | read | The current character line, upper nibble $F |
$1900, $1901, $1902 | P1_KEYS_147, P1_KEYS_2580, P1_KEYS_369 | read | Controller 1 keypad: rows 1/4/7, 2/5/8/0 and 3/6/9; the fire buttons are equivalent to keypad 2, so bit 3 of $1901 |
$1903 | P1_KEYS_EXTRA | read | The four additional keys of the Palladium, controller 1 |
$1904, $1905, $1906 | P2_KEYS_147, P2_KEYS_2580, P2_KEYS_369 | read | Controller 2 keypad, the same rows; fire is bit 3 of $1905 |
$1907 | P2_KEYS_EXTRA | read | The extra keys of the Palladium, controller 2 |
$1908 | PANEL | read | Console switches: bit 0 Start, bit 1 Option, bit 2 Difficulty |
$1980 | UDC_RAM | write | User-defined characters (codes $38-$3F); also the image of object 0 |
$19F8 | UVI_ALT_MODE | write | Alternate colours and modes; bit 7 enables graphics mode (MAME’s code also uses bit 6 for the 26-line mode, which contradicts its header’s “refresh mode”) |
$19F9 | UVI_COLOURS | write | Screen and character colours; bit 7 selects 8x8 or 8x16 characters, bit 6 the pot multiplexer |
$19FA | UVI_SPR23_COLOURS | read (inferred) | Colours and sizes of sprites 2 and 3 |
$19FB | UVI_SPR01_COLOURS | read (inferred) | Colours and sizes of sprites 0 and 1 |
$19FC | UVI_COLL_BG | read (inferred) | Sprite to background collision bits |
$19FD | UVI_COLL_SPR | read (inferred) | Sprite to sprite collision bits |
$19FE | UVI_POT_1_3 | read | Digital pot 1 and 3 (a joystick-derived value when the A/D select is active) |
$19FF | UVI_POT_2_4 | read | Digital pot 2 and 4 (MAME defaults it to $6F) |
The names are also given to $1800 (UVI_SCREEN_UPPER), $18D0 (USER_RAM_1), $1A00 (UVI_SCREEN_LOWER) and $1AD0 (USER_RAM_2). They are shown where an operand is exactly that address; an access in the
middle of an area, or through a mirror, appears as a number.
Not described
Known, not yet covered
- Reference: the exact bit layouts of the UVI registers (sprite sizes and colours, the sound control byte, the collision bits): MAME’s comments give some, the data sheet gives all, and it was not read.
- Viewer: names for the mirror copies and for the middle of the screen and user RAM areas.
Unknown
- Reference: the registers at
$19FA-$19FDare inferred (above); the real chip’s behaviour at the unmapped addresses is not described by MAME.
Links
Reference
- MAME arcadia.cpp – the driver this page follows
- MAME arcadia_v.cpp – the video code: the register accesses
- Arcadia 2001 ROM – the overview