Where this comes from
Read in place from jzIntv 20200712 (doc/programming/memory_map.txt, intellicart.txt, examples/library/gimini.asm, which its author dedicated to the public domain, and examples/hello/hello.asm) and cross-checked against
MAME’s src/mame/mattel/intv.cpp (fetched 2026-11-18). The register names in the disassembly are written in the style of gimini.asm (its STIC.mob0_x is STIC_MOB0_X); they are the viewer’s labels, not a standard.
All addresses count 16-bit words, as the CP1610’s do.
The memory map
| Words | What |
|---|---|
$0000-$007F | STIC registers (video): MOB x, y, attribute and collision registers, display enable, mode select, colour stack, border, delays. Accessible only in the first ~2000 cycles of vertical blank. |
$0040-$005F | Write-only Intellicart bank-switch registers (inside the STIC range) |
$0080-$0081 | Intellivoice: address load (speech command) and the speech FIFO |
$00E0-$00E3 | UART (ECS only) |
$00F0-$00FF | The second sound generator PSG 2 (ECS only); its last two registers read the ECS keyboard |
$0100-$01EF | 8-bit scratch RAM; $0100-$0101 the vertical blank interrupt vector |
$01F0-$01FF | The sound generator PSG 1 of the Master Component; its last two registers read the hand controllers |
$0200-$035F | 16-bit system RAM; $0200-$02EF is BACKTAB, the background table |
$0400-$04FF | Intellivision II EXEC extension (a cartridge slot on the other models, in MAME) |
$0700-$0BFF | Intellivoice expansion bus |
$1000-$1FFF | The EXEC ROM, ten bits wide: $1000 hardware reset vector, $1004 hardware interrupt vector |
$2000-$2FFF | ECS EXEC ROM, first 4K (free for cartridges without an ECS) |
$3000-$37FF | GROM, the graphics ROM, eight bits wide (accessible in the first ~3780 cycles of vertical blank) |
$3800-$3AFF | GRAM, graphics RAM ($3800-$39FF), with aliases above (incomplete decoding) |
$4000-$403F | Read and write sensitive STIC aliases (the CPU does not see the data read); $4000-$47FF is 8-bit RAM on an ECS |
$4800-$4FFF | PlayCable monitor; the EXEC jumps to a viable ROM here at boot |
$5000-$6FFF | The first 8K words of the default cartridge memory map; the header is at $5000-$5014 |
$7000-$7FFF | Keyboard Component monitor ROM or ECS EXEC ROM; the EXEC checks here first at boot |
$8000-$BFFF | Available to cartridges ($8000-$803F a STIC alias, $B800-$BFFF a GRAM write alias: map ROM, not RAM, there) |
$C000-$CFFF | Cartridge space (reserved for ECS Extended BASIC), $C000-$C03F a STIC alias |
$D000-$FFFF | Available to cartridges ($E000-$EFFF also the ECS EXEC ROM, $F800-$FFFF a GRAM write alias) |
The EXEC boot sequence (memory_map.txt): minimal initialisation (stack pointer $02F1, the interrupt service routine set up, $5014 stored in $02F0); if there is viable ROM at $7000 it jumps there; else at $4800;
otherwise it initialises its structures from the EXEC header at $5000-$5014, shows the title screen and starts the program.
The cartridge header at $5000
This is the layout that examples/hello/hello.asm calls an EXEC-friendly ROM header (its field names are its comments). A BIDECLE is a 16-bit value written as two decles, low byte first (the EXEC reads it with an SDBD double-byte read).
The header is a convention of programs, not a part of the file format: nothing in a .bin says it is there, so the viewer shows what the first words say without testing that they are a header.
| Word | Field | What |
|---|---|---|
$5000 | MOB picture base | BIDECLE pointer (to a null list when there are no pictures) |
$5002 | Process table | BIDECLE pointer |
$5004 | Program start | BIDECLE pointer to the code the EXEC runs |
$5006 | Background picture base | BIDECLE pointer |
$5008 | GRAM pictures | BIDECLE pointer |
$500A | Title and date | BIDECLE pointer to the routine that shows the cartridge title and copyright date |
$500C | Flags | One decle; hello.asm uses $03C0: “no ECS title, run code after title, no clicks”. The bits are not described here. |
$500D | Screen border control | One decle |
$500E | Colour mode | One decle: 0 colour stack, 1 foreground/background |
$500F-$5013 | Initial colours | Colour stack 0 to 3 and the border colour |
The header ends at $5014, which is why the EXEC stores that value. The explorer names $5000 ROMHDR.
The Intellicart bank registers
Thirty-two write-only registers at $0040-$005F, one per 2K range, add a page number to the address of a range marked bank-switched: target = (value << 8) + (address & $07FF). Register $0040 + k controls the
range (k & 15) * $1000 + (k >> 4) * $800: $0040 is $0000-$07FF, $0041 is $1000, $004F is $F000, $0050 is $0800 and $005F is $F800. The registers are undefined at
start, so start-up code must not sit in a bank-switched range, and $4800, $5000 and $7000 must not be bank-switched. The explorer names them ICART_BANK_0000 to ICART_BANK_F800.
The names the explorer uses
| Words | Names |
|---|---|
$0000-$0007 | STIC_MOB0_X to STIC_MOB7_X (x position) |
$0008-$000F | STIC_MOB0_Y to STIC_MOB7_Y (y position, resolution, size, flips) |
$0010-$0017 | STIC_MOB0_A to STIC_MOB7_A (colour, card, priority) |
$0018-$001F | STIC_MOB0_C to STIC_MOB7_C (collision detect) |
$0020, $0021 | STIC_VIDEN (display enable), STIC_MODE (mode select) |
$0028-$002B, $002C | STIC_CS0 to STIC_CS3 (colour stack), STIC_BORD (border colour) |
$0030, $0031, $0032 | STIC_H_DELAY, STIC_V_DELAY, STIC_EDGEMASK |
$0040-$005F | ICART_BANK_0000 to ICART_BANK_F800 |
$0080, $0081 | IVOICE_ALD, IVOICE_FIFO |
$00F0-$00FF, $01F0-$01FF | PSG1_CHN_A_LO … PSG1_IO_PORT1 and PSG0_CHN_A_LO … PSG0_IO_PORT1: the sixteen registers of each sound generator (channel A, B, C period low, envelope period low, the four high parts, channel enable, noise, envelope, three channel volumes, two I/O ports) |
$0100, $0200, $02F0 | VBLANK_VECTOR, BACKTAB, SYSRAM |
$1000, $1004 | EXEC_RESET, EXEC_INTERRUPT |
$3000, $3800 | GROM, GRAM |
$5000 | ROMHDR |
Not described
Known, not yet covered
- Reference: the bit layouts of the STIC registers (
gimini.asmlists them; this page names the registers only), the sound generator’s registers, the ECS and Intellivoice details, and the console EXEC’s own entry points beyond the two vectors. - Viewer: the aliases of the STIC and GRAM at
$4000,$8000,$C000,$7800and so on are not named.
Unknown
- Reference: the meaning of the bits of the header’s flags word.
Links
Reference
- jzIntv – its documentation and
gimini.asmare the sources - MAME intv.cpp – the second route for the map
- INT – the overview; the Intellicart .ROM file